NEW FORMAT 310 ml
Applier not included
TECHNICAL DATA SHEET
It remains soft, flexible and compact even after long periods and does not crystallize.
We recommend combined use with Cotol (activator) to obtain a more fluid adhesive and a shorter drying time.
To obtain a colored coating, you can add food coloring to Aquasure!
Ideal for trilaminate wetsuits.
250 ml packaging.
Use Aquasure to seal the joint seals.
STEP 1: Reverse the internal / external mute and clean with Cotol all parts to be sealed, to remove all traces of grease, dirt, dust.
STEP 2: Apply Aquasure on a layer of about 2 mm, in oder to cover the joints for at least 12 mm. Use a small brush to saturate the fabric textures. Let dry 24 hours.
If you use Aquasure with Cotol (max 5 : 1 part), slowly mix the components, to avoid the formation of microbubbles in the compound.
After application, wait 2 hours to dry.
All indicated times may vary depending on the variation of environmental humidity percentage.
Aquasure is also ideal for repairing holes and tears. For holes bigger than a pin, create a bottom barrier with tape. Saturate the hole and at least 6 mm all around. Remove the tape only when completely dry.
With Aquasure you can also create an ultra-durable and flexible kneepad , to protect wetsuits against abrasion . Apply a light coat of Aquasure with a plastic spatula and let to dry for 24 hours.
Totally on track with REACH law on safety.
Ventilate the area during and after use.
Please note that each laboratory can mix and use Aquasure (or SeamGrip) and Cotol in different ways and customized, so our tests can not cover all the possibilities.
Our tests are only general compatibility test.
|9500MN91025||Aquasure 310 ml|
|9500MN10791GB||Aquasure 250 ml|