Via dell'Industria 49, 34075 San Canzian d'Isonzo (GO) - Italy
+39 0481 360830
comunicazione@d-ditaly.com

EASYSEAL TIZIP

Categorie: WATERPROOF ZIPPERS. Tags Prodotto: cerniere stagne and tizip.

The TIZIP Easy is made from a strong plastic coil zipper on a high strength fabric. Every coil half is safely embedded and secured in a plastic profile. When the TIZIP Easy is closed the sealing lips above and below the coil are compressed making a perfect seal. The entire plastic profile is highly abrasion resistant. The unique design prevents the slider from wearing down the sealing lips when the zipper is opened or closed.
The physical design of the TIZIP Easy increases the seal strength when the pressure is raised or when cross tension is applied. Both actions lead to an increased mechanical pressure on the top sealing lip.

Descrizione

APPLICATIONS:

  • – Diving suits (semi-dry suits)
  • – Watersports clothing
  • – Tents, flexible covers
  • – Protective clothing for leisure, safety and industrial applications (gas and chemical protection)
  •  -Flexible containers for electronic instruments, documents, machines and apparatus for storage and transport
  •  -Inflatable objects, jumping castles, advertising balloons, etc.
  •  -Bags and backpacks for daily use and outdoor activities such as cycling, biking, sailing, hiking, climbing

TIGHTNESS:

The TIZIP Easy will hold 250 mbar air pressure. The TIZIP Easy is slightly less airtight than the TIZIP SuperSeal but is easier to operate. Heavy bending may cause leakage. Please try to avoid!

DUST AND SAND:

The zipper is highly resistant to damage caused by sand and dust; however in presence of dust and sand,  it’s suggested  to clean the zip with water and liquid soap or other gentle cleansens.

Dust crumbs, present in the spiral trim, can condition the waterproof endurance. If the zip is used to protect sensible materials, it’s necessary a frequent and accurate zipper cleaning before every use.

LUBRICATION

No zipper is precautionally lubricate. However the lubrication is essential for maintaining the simple use and the perfect chain’s match.
After installing the zipper in the product, it’s recommended to lubricate the whole chain and to let flow the cursor to one edge to the other, for at least 5 times in both ways.
It can be used “acid free”, grease and oils to lubricate.
The initial lubrication on the whole chain is essential.
If the spiral appears dry, the user has to lubricate the zipper periodically (approximately every 10 use).
It’s suggest to consult the instructions and use the given lubricant  for every zipper. The lubrication of the external surfaces, allows a major manageability  of the cursor.

OPERATING FORCE

For the sealing function the TIZIP Easy requires a fairly strong pull of the slider. Please allow a slightly higher pulling force as compared to regular zippers. The handy toggle allows comfortable operation. A wet surface or lubricant on the outer flanges of the sealing profile greatly reduces the pulling force.

STABILITY

The TIZIP Easy’s performance in terms of strength and durability is outstanding. It can take weight, it is abrasion resistant and it will survive short term sharp bending and twisting without separating. When closed, the TIZIP Easy has a crossbreaking strength of minimum 300 N/cm.

VERSIONI:

  • – Closed edges / not divisible
  • – Tape width 50 mm / 70 mm
  • – Chain width 11 mm
  • – Edges extension  16 mm / 25 mm
  • – Zip length: the zip is measured including the edges. To find the chain measure subtract al least 2 cm.

TESTING
The sealing function of the TIZIP Easy is tested by fastening the zipper in a straight rectangular frame, 3cm wide, face down. Compressed air is applied to the front side of the zipper and water poured over the back until it is submersed. To pass the test no air bubbles may occur for a period of 20 seconds. Random testing is performed during the production of every batch.

TEST DI RESISTENZA:

RESISTANCE:

  • UV RAY: Very Good
  • MICROBES: Satisfactory
  • GASOLINE AND OILS: Very Good
  • HYDROLYSIS (NORMAL TEMPERATURE): Good
  • HYDROLYSIS (EXTREME AND HUMID TEMPERATURE): Sufficient
  • TEMPERATURE INTERVAL: – 30°C / + 80°C
  • LIGHT ACIDS AND ALKALI (NORMAL TEMPERATURE): Good

FAQ

HOW TO CHOOSE THE RIGHT SIZE?