Language:

TELEFONO: 0481 776542

via dell'Industria 49
34077 San Canzian
D'Isonzo (GO)
ITALY

hypatex
HYPATEX

The trilaminate HYPATEX is indicated for the production and repair of inflatable boats or similar products, for a medium / high quality sector.
It 's easy to clean, resistant to abrasion and UV rays.

AVAILABLE COLOURS:

custom_gallery
images not found

Description

HYPALON is the registered trademark by Du Pont to indicate the chlorosulfonated polyethylene (CSM), a synthetic rubber, which is supplied to the rubber industry, as raw material for processing and vulcanizate in oder to obtain a wide range of finished products.

With Hypalon is produced the trilaminate HYPATEX, composed by:

  • Hypalon
  • fabric (polyester Dtex 1670 or 2200 Dtex)
  • neoprene in the state of pre-extrusion, that is not inflated (CR)

 

Features:

  • Thicknesses 1:00 to 1:25 mm (h 145-150 cm)
  • Weight 1300/1500 gr / m2
  • High resistance to UV rays
  • Anti abrasion treatment
  • Resistant to contact with hydrocarbons
  • Easy to clean

 

 

HYPATEX TECHNICAL DATA SHEET

 

Codice prodotto

THYPRMT2KBLACK - Hypatex thickness 1,25 mm h 152 cm black


THYPRMT1JLWHITE - Hypatex thickness 1 mm h 145 cm white


THYPRMT1JLGREY - Hypatex thickness 1 mm h 145 cm light gray


THYPRTMT1JLGREYD - Hypatex thickness 1 mm h 145 cm dark gray


THYPRMT1JLBLUE - Hypatex thickness 1 mm h 145 cm blue


THYPRMT1JLBLACK - Hypatex thickness 1 mm h 145 cm black


THYPRMT1JLRED - Hypatex thickness 1 mm h 145 cm red

 

The cheaper alternative is BOTEX, composed by PVC-fabric-PVC.
BOTEX TECHNICAL DATA SHEET

 

Codice prodotto
TPVCKBT1C0009BI - Botex Pvc thickness  0,9 mm h 152 cm bianco
In combination it is available the BAND-TEX tape: a neoprene strip to weld the internal joints.
The revolutionary diagonal '' cross '' gives elasticity and extensibility, allowing an easier application on curved surface.

Composition: neoprene CR / nylon 420D / neoprene CR.

Available in tapes of 5 cm and 80 cm height.

BGM01A THERMAL BANDS

 

 

 

 

 

TECHNICAL DATA SHEET BAND-TEX

 

 

Codice prodotto

THYPRT050-50 - Band-Tex tape h 5 cm


THYPRT050-800 - Band-Tex sheet h 80 cm


 

INSTRUCTIONS AND ADVICE FOR STICKING

  • Sand and brush the surface to be glued.
  • Pad clean with SOLVEK NG solvent  and wait 5 minutes.
  • Apply a first coat of EUROFIX RAFTS prepared with 5% DESMOUR RFE and let dry for at least 30 minutes.
  • Apply a second coat of the same product used before.
  • Allow to air dry for about 15 minutes and then couple the supports by pressing for 15 seconds to 2 atmospheres.

INSTRUCTIONS AND ADVICE FOR CLEANING

  • Dilute with water a common neutral detergent (such as a hand cleaner, a powder detergent ...).
  • Dip a cotton cloth or sponge and clean the surface. Rinse with clean water.
  • Do not reuse the dirty water in any way as it contains elements such as:
    - Waste water (including dust)
    - diesel
    - motor oil